Modular worktop for the HEAT corner module Made from particularly hard-wearing natural stone with an elegant finish - 12 mm Weatherproof and heat-resistant Resistant to abrasion and scratches Very easy to clean and hygienic Can be used for left and right corners

Set of individual covers for HEAT universal cabinet Compatible with Outdoorchef Broil King Regal 420 and 470 built-in barbecues For closing the front panel and side panels next to the built-in barbecue 2 granite covers (worktop) Stainless steel front panel – magnetic fastening

Modular worktop for the HEAT corner module Made from particularly hard-wearing natural stone with an elegant finish - 12 mm Weatherproof and heat-resistant Resistant to abrasion and scratches Very easy to clean and hygienic Can be used for left and right corners

Modular worktop for HEAT outdoor cabinets for a customized outdoor kitchen design Made of particularly durable natural stone with a sophisticated finish - 12 mm Weather- and heat-resistant Abrasion- and scratch-resistant Particularly easy-care and hygienic Equip your HEAT cabinet module with a durable stainless steel worktop. The hygienic worktop is particularly easy to clean and is heat-resistant, water-resistant and weatherproof all year round. Greasy soiling, stains and encrustations can be removed without hesitation using intensive barbecue cleaners.

Modular worktop for HEAT outdoor cabinets for individual outdoor kitchen design Made of extremely durable HPL with a wood look Abrasion and scratch resistant Particularly easy to clean and hygienic Heat resistant up to 140°C Equip your HEAT cabinet module with a robust and exceptionally high-quality HPL worktop. With its timeless light oak decor, the look blends perfectly into any setting. The durable material consists of an extremely long-lasting composite and is completely weather-resistant and stain-resistant. The smooth surface is not only particularly easy to clean but is also abrasion and scratch resistant. So, if your outdoor kitchen gets a little dirty, you can confidently use any grill cleaner or scouring pad to remove stubborn dirt. The material is heat-resistant up to approximately 140°C and is also UV-resistant and water-resistant.

Back panel for HEAT built-in station for free-standing installation Compatible with HEAT X-515 RB grill module Made of high-quality steel, with resistant powder coating for maximum durability The rear panel is compatible with the HEAT X-515 grill module and ensures a uniform look at the rear of the outdoor kitchen if it is free-standing. The panel for the rear of the grill module is made of durable stainless steel with a hard-wearing powder coating.

Back panel for HEAT built-in station for free-standing installation Compatible with HEAT X-415 RB grill module Made of high-quality steel, with resistant powder coating for maximum durability The rear panel is compatible with the HEAT X-415 and 245 grill modules and ensures a uniform look at the rear of the outdoor kitchen if it is free-standing. The panel for the rear of the grill module is made of durable stainless steel with a hard-wearing powder coating.

Practical dividers for flexible insertion in HEAT drawers For a better overview and tidier drawers Fits in all big drawers of the HEAT modules Made of high-quality stainless steel, with resistant powder coating for maximum durability Set of 2 drawer dividers Keep your drawers tidy and organized: The HEAT drawer dividers (wide) fit perfectly into large drawers of the HEAT outdoor kitchen modules and can be positioned flexibly. Thanks to the convenient division of the drawers, smaller accessories, grill plates, pizza stones and crockery can also be stored safely and neatly in the drawer. The dividers are made of stainless steel with a hard-wearing powder coating, making them easy to clean and highly durable.

Prevents heat damage to the body of the HEAT outdoor kitchen modules Easy to install between the grill module and the adjacent module High-quality production from stainless steel, with resistant powder coating for maximum durability The HEAT spacer protects your HEAT cabinet modules from heat damage to the body. The stainless steel spacer is placed directly between the cabinet module and an barbecue module of the HEAT outdoor kitchen and thus decouples both cabinets without an unsightly gap between the modules. The spacer is made of durable stainless steel with a hard-wearing powder coating.

Faceplate for a clean front finish of the HEAT modules to the floor Uniform appearance of the kitchen unit and protection against dirt under the module Made of high-quality stainless steel with durable powder coating for maximum longevity Fits on HEAT X-515 RB grill module Close the open sides of your HEAT outdoor kitchen unit with the plinth panel and achieve a closed look “as if from a single piece”. The closed plinth also prevents dirt from getting under the kitchen. The plinth panel is compatible with the front of the HEAT X-515 RB grill module.

Practical dividers for flexible insertion in HEAT drawers For a better overview and tidier drawers Fits in all low drawers of the HEAT modules (top drawer) Made of high-quality stainless steel, with resistant powder coating for maximum durability Set of 2 drawer dividers Ideal for the cutlery drawer: The HEAT drawer dividers (narrow) in a set of 2 practically divide the top drawer in HEAT outdoor kitchen modules into smaller compartments, making it ideal for storing cutlery, barbecue thermometers or skewers. This not only provides a better overview, but also protects barbecue accessories from damage and scratches. The dividers are made of stainless steel with a hard-wearing powder coating, making them easy to clean and particularly durable.

Faceplate for a clean front finish of the HEAT universal module to the floor Uniform appearance of the kitchen unit and protection against dirt under the module Made of high-quality stainless steel with durable powder coating for maximum longevity Fits on HEAT universal module

Faceplate for a clean front finish of the HEAT universal module to the floor Uniform appearance of the kitchen unit and protection against dirt under the module Made of high-quality stainless steel with durable powder coating for maximum longevity Fits on HEAT universal module

Adapter for HEAT sink module For connecting Gardena garden hoses Simple and uncomplicated installation Quick water access in the outdoor kitchen No special water pipes required Made from durable and robust stainless steel Simply connect your Gardena garden hose to the HEAT sink module using the adapter. The adapter is simply connected to the two water connections on the tap and is then connected to a Gardena garden hose. Water is already flowing in the outdoor kitchen!

Panel for a clean side finish of the HEAT modules to the floor Uniform appearance of the kitchen unit and protection against dirt under the module Made of high-quality stainless steel, with durable powder coating for maximum longevity Compatible with HEAT X-415 RB and X-515 RB grill module Close the open sides of your HEAT outdoor kitchen unit with the plinth panel and achieve a closed look “as if from a single cast”. The closed plinth also prevents dirt from getting under the kitchen. The plinth panel is compatible with a HEAT built-in station (415, 515), which is installed at the end/beginning of a kitchen unit. For a particularly long service life, the plinth panel is made of stainless steel with a durable powder coating.

Panel for a clean back edge of the HEAT modules to the floor Uniform appearance of the kitchen unit and protection against dirt under the module Made of high-quality stainless steel, with resistant powder coating for maximum durability Compatible with HEAT cabinet The plinth panel for the HEAT outdoor kitchen provides a clean finish between the modules and the floor. The closed look has an elegant appearance and protects against dirt and moisture under the outdoor kitchen. The stainless steel panel is particularly durable thanks to its hard-wearing powder coating and is compatible with the cabinet module of the HEAT outdoor kitchen.

Faceplate for a clean front finish of the HEAT modules to the floor Uniform appearance of the kitchen unit and protection against dirt under the module Made of high-quality stainless steel with durable powder coating for maximum longevity Fits on HEAT cabinet module Close the open sides of your HEAT outdoor kitchen unit with the plinth panel and achieve a closed look “as if from a single piece”. The closed plinth also prevents dirt from getting under the kitchen. The plinth panel is compatible with the front of the cabinet module.

Faceplate for a clean front finish of the HEAT modules to the floor Uniform appearance of the kitchen unit and protection against dirt under the module Made of high-quality stainless steel with durable powder coating for maximum longevity Fits on HEAT X-415 RB grill module Close the open sides of your HEAT outdoor kitchen unit with the plinth panel and achieve a closed look “as if from a single piece”. The closed plinth also prevents dirt from getting under the kitchen. The plinth panel is compatible with the front of the HEAT X-415 RB grill module.

Panel for a clean side finish of the HEAT modules to the floor Uniform appearance of the kitchen unit and protection against dirt under the module Made of high-quality stainless steel, with durable powder coating for maximum longevity Compatible with HEAT cabinet module Close the open sides of your HEAT outdoor kitchen unit with the plinth panel and achieve a closed look “as if from a single cast”. The closed plinth also prevents dirt from getting under the kitchen. The plinth panel is compatible with both cabinet modules of the HEAT outdoor kitchen and covers the side plinth when the cabinet module is at the end of the kitchen unit. For extra durability, the plinth panel is made of stainless steel with a hard-wearing powder coating.

Panel for a clean front finish of the HEAT modules to the floor Uniform appearance of the kitchen unit and protection against dirt under the module High-quality stainless steel construction with durable powder coating for maximum longevity Fits with HEAT cabinet modules 46,5cm

Panel for a clean front finish of the HEAT modules to the floor Uniform appearance of the kitchen unit and protection against dirt under the module High-quality stainless steel construction with durable powder coating for maximum longevity Fits with HEAT cabinet modules 46,5cm

To connect Heat cabinet and grill modules with each other Threaded rod with screw connection for mounting

For additional levelling of the HEAT modules Ideal for levelling out larger height differences at the installation site (kitchen feet can only be levelled by up to 20 mm) Several panels can be laid on top of each other to compensate for slopes Made from a durable and resistant material for outdoor use